NO.

Name

Function Description

1

OLED screen

Display matrix switching status, input / output port, EDID,

Baud rate, IP Address.

2

Power LED

The LED will illuminate in green when the product is connected to power supply, and red when the product is on standby.

3

Input / Output buttons

You need to press an output button (1~8) firstly and then press an input button (1~8) to select the corresponding

input source for the output port.

4

MENU / ENTER

/ UP /DOWN

①EDID Check:On the initial OLED display screen, press

“MENU” button to enter the Matrix switching state interface,

then press “UP/DOWN” button to check the current EDID information of each HDMI input port.

②EDID setting: On the initial OLED display screen, press

“MENU” button to enter the EDID setting interface, press

“UP/DOWN” button to select the required EDID, and press the “ENTER” button. A prompt “copy to input :” will appear. Then press “UP/DOWN” button to select the input port you need to set, and press “ENTER” button again to confirm.

③Baud rate setting: On the initial OLED display screen,

press “MENU” button to enter the Baud rate interface, and

press “UP/DOWN” button to select the required Baud rate, finally press the “ENTER” button to confirm the setting.

④IP Address Check: On the initial OLED display screen, press “MENU” button to enter the IP interface, then press

“UP/DOWN” button to check the current IP address. Pressing the “MENU” button again will return to the initial OLED display status.

5

POWER button

Long press the POWER button for 3 seconds to enter the

standby mode, then short press it to wake up the device.

6

IR Window

IR receiver window, it only receives the IR remote signal from this product.

7

LOCK button

Short press the LOCK button to lock front panel buttons (Except the power button); Press it again to unlock.